unofficial-bambu-mcp@0.3.0
VERIFIED· not startedPublisher claims: "Unofficial MCP server to build, edit, slice, check and calibrate Bambu Studio projects (.3mf) from an AI assistant." Observed in sandbox: no network, touches nothing outside the project, writes no memory.
Coverage
Not started: dependency install failed; the server itself was not observed.- Tested
- the dependency install step · every file read, file written and host contacted by what ran
- Not tested
- server startup · the tool list · tool behavior
What this means for the label: Verified here covers what ran. The server's tools were not exercised with a real credential, so nothing about their behavior is asserted; the credential summary below says what to do with that.
Before you give it your token
- It will ask for
- no credential variables read in the code
- Where it talks to
- no vendor host named in the codeAlso bambulab.com, microsoft.com, openxmlformats.org — not the publisher's domain; check what for before connecting.
- What we saw when it ran
- no credential files read · no network
- What we could not test
- server startup · the tool list · tool behavior
Connect it under the guard. Not started: dependency install failed; the server itself was not observed. The code names no credential variable; the guard pins the network to what the honeypot saw and logs every call.
Never paste a credential into a chat, a ticket or a report, including ours. How the guard holds it.
Is [email protected] safe to install?
KillerSkills ran it in the KillerSkills honeypot sandbox (2 scenarios; not started: dependency install failed; the server itself was not observed) on 2026-11-20 and scored it 85/100 (Verified). In what ran, nothing we could detect went wrong: no undeclared network egress, no credential reads, no persistent instruction writes. What it does with a real credential was not observed; the static findings and the publisher carry the rest of the score. Summary: no network, touches nothing outside the project, writes no memory.
Behavior trace
Honeypot run · 0 s · 2 scenarios · 0 deviationsStatic findings
Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use the printer screen, BambuFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Developer Mode that runs in LAN-only mode, without the cloud, and "does not require authorization verification"Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.started a print on one in Developer Mode.Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.- Direct printing and object skipping for printers in LAN-only + Developer Mode, behind explicit confirmation.Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.out = subprocess.run(["ps", "-o", "time=", "-p", str(pid)], capture_output=True, text=True,Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.acts only when called again with the code. A printer in cloud mode refuses the Developer Mode commands.Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.…Bambu Connect**) ready to print: you check the AMS mapping and press Print. | | Developer Mode (LAN farms) | For printers in LAN-only mode with Developer Mode, where Bambu fi…Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.p = subprocess.Popen(cmd, stdout=log, stderr=subprocess.STDOUT, stdin=subprocess.DEVNULL)Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use the printer screen, BambuFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.subprocess.Popen(["open", "-a", bundle, path])Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.with Developer Mode** on, which turns off the cloud and Bambu Handy. In normal cloud mode it refuses them, so thisFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.out = subprocess.run(["/usr/libexec/PlistBuddy", "-c", "Print :CFBundleShortVersionString", plist],Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.curl -sL -o studio.AppImage "$url" && chmod +x studio.AppImageFix: Request the narrowest permission that works; replace wildcards with the exact paths or hosts.LAN-only + Developer Mode, `send_to_printer(via='lan')` starts a print, `skip_objects` skips objects andFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.subprocess.Popen(["xdg-open", url])Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.out = subprocess.run(["tasklist"], capture_output=True, text=True, timeout=10).stdoutFix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.…Bambu Connect**) ready to print: you check the AMS mapping and press Print. | | Developer Mode (LAN farms) | For printers in LAN-only mode with Developer Mode, where Bambu fi…Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.The Developer Mode tools were checked against a printer in cloud mode (refused, with the right answer) but neverFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.subprocess.Popen([executable() or "bambu-studio.exe", path])Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.subprocess.Popen([executable() or "bambu-studio", path])Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use Bambu Handy or the printer.Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.the print dialog and presses Print. Direct printing for printers in LAN-only + Developer Mode is written (FTPSFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.started a print on one in Developer Mode.Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.- Developer Mode tools (LAN-only printers, e.g. print farms): `send_to_printer(via='lan')` uploads and starts aFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.The Developer Mode tools were checked against a printer in cloud mode (refused, with the right answer) but neverFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Developer Mode (print farms; in cloud mode the printer refuses and the answer says so). Two steps: withoutFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.os.startfile(url) # noqa: S606Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.acts only when called again with the code. A printer in cloud mode refuses the Developer Mode commands.Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use the printer screen, BambuFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use Bambu Handy or the printer.Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.LAN-only + Developer Mode, `send_to_printer(via='lan')` starts a print, `skip_objects` skips objects andFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.Results on hardware we do not have are just as useful: Windows, Linux, A1, X1C, H2S, a printer in Developer Mode.Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.- Developer Mode tools (LAN-only printers, e.g. print farms): `send_to_printer(via='lan')` uploads and starts aFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.Results on hardware we do not have are just as useful: Windows, Linux, A1, X1C, H2S, a printer in Developer Mode.Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.out = subprocess.run(["ps", "-axo", "pid=,command="], capture_output=True, text=True, timeout=10).stdoutFix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.with Developer Mode** on, which turns off the cloud and Bambu Handy. In normal cloud mode it refuses them, so thisFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.subprocess.Popen(["open", url])Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.Developer Mode (print farms; in cloud mode the printer refuses and the answer says so). Two steps: withoutFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.subprocess.Popen([app, path], stdin=subprocess.DEVNULL, stdout=subprocess.DEVNULL,Fix: Build commands from fixed arguments, never from interpolated strings; prefer an API client over shelling out.code after the user agreed. Printers in LAN-only mode with Developer Mode also accept printing, skipping objects andFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.Bambu firmware accepts it only in LAN-only mode with Developer Mode; otherwise use the printer screen, BambuFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.they were checked to be refused with the answers above; the start of a print on a printer in Developer Mode has notFix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.Commands from other programs are accepted only in **LAN-only mode with Developer Mode** on (printer screen:Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.Developer Mode that runs in LAN-only mode, without the cloud, and "does not require authorization verification"Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.The printer is in cloud mode: these need LAN-only mode with Developer Mode; see [printing.md](printing.md).Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.8. Bambu Lab Wiki, "How to enable Developer Mode on Bambu Lab printers".Fix: Keep SKILL.md to visible, descriptive text. Remove comments and encoded text that address the agent.The printer is in cloud mode: these need LAN-only mode with Developer Mode; see [printing.md](printing.md).Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Commands from other programs are accepted only in **LAN-only mode with Developer Mode** on (printer screen:Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.- Direct printing and object skipping for printers in LAN-only + Developer Mode, behind explicit confirmation.Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.they were checked to be refused with the answers above; the start of a print on a printer in Developer Mode has notFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.8. Bambu Lab Wiki, "How to enable Developer Mode on Bambu Lab printers".Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.code after the user agreed. Printers in LAN-only mode with Developer Mode also accept printing, skipping objects andFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.the print dialog and presses Print. Direct printing for printers in LAN-only + Developer Mode is written (FTPSFix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.8. Bambu Lab Wiki, "How to enable Developer Mode on Bambu Lab printers".Fix: Remove the text that addresses the agent rather than the reader; describe behavior, do not instruct.Cost to the agent
Tokens estimated at four characters each. The tool list is re-read by the agent on every turn, so it is the number to compare between servers that do the same job: ranked across the index.
Known vulnerabilities
No advisories in OSV for unofficial-bambu-mcp@0.3.0 as of 8 min ago. This is the package itself, not its dependencies.